Sonochemical synthesis of PANI-BiVO4-GO semiconductor nanocomposite highly efficient visible-light photocatalytic performance

Abstract

Polyaniline/Bismuth Vanadate/Graphene Oxide (PANI-BiVO₄-GO) or BGPA composite was prepared by sonochemical deposition of bismuth vanadate-graphene oxide (BiVO₄) nanoparticles on the surface of polyaniline (PANI). The best photocatalytic degradation performance was obtained by 5wt% BGPA composites for MB, RhB, and SO dyes, which is approximately 4 times higher than that of 1% BGPA. Meanwhile, the photocatalytic stability of BiVO₄ was significantly improved by introducing PANI into the PANI-BiVO₄-GO composite. The dramatic promotion of the photocatalytic degradation performance and the photocatalytic stability can be attributed to the formation of a heterojunction free electron between PANI and BiVO₄-GO. The existence of those extra free electrons can dramatically enhance the efficiency of the photogenerated electrons, which accelerate the transfer of photogenerated holes from BiVO₄-GO to PANI, and therefore inhibit the self-oxidation of BiVO₄.     

IF钢退火过程中再结晶行为的EBSD表征

借助EBSD等技术研究了从冷轧到退火过程中IF钢中铁素体再结晶晶粒的取向演变。研究结果表明,从冷轧到退火过程中,铁素体晶粒取向向着平行于法向的[111]晶粒演变,而平行于法向的[100]晶粒逐渐消失;在冷轧变形过程中,铁素体晶粒的晶体取向决定着发生滑移变形的难易程度,与[100]晶粒相比,[111]晶粒更易于发生滑移变形,并在晶粒内部积累大量的位错,储存了大量的应变能,在随后的退火过程中,应变能较高的[111]晶粒优先形核并长大,优先发生再结晶,而应变能较低的[100]晶粒的再结晶受到阻碍。随着退火温度的升高,γ织构([111]//ND)明显增强,其织构组分(111)[112]尤为明显。     

Preparation of Aqueous Nanodispersions of Disperse Dye by High-Gravity Technology and Spray Drying

Disperse dyes are poorly water-soluble and difficult to stably disperse in an aqueous medium, which greatly limits their application in dyeing synthetic fibers. Micronization can solve this problem. Herein, a facile way to prepare stable aqueous nanodispersions of disperse dye (C.I. disperse yellow 54) is presented by combining high-gravity antisolvent precipitation in a rotating packed bed (RPB) with spray drying. The as-prepared product had an average particle size of 120 nm, which could be readily redispersed in water. Compared with raw dye, the wettability and dispersibility of disperse dye nanoparticles were remarkably improved. Furthermore, the dyeing properties of the nanodispersions were obviously better than those of the commercial dye, which was micronized by ball milling.     

基于单神经元PID的真空炉自适应温度控制

根据真空热处理系统的特点,将单神经元PID控制算法应用到真空热处理系统的温度控制上。根据神经网络的非线性逼近能力和自学习自适应的特点,将单神经元网络与PID控制结合实现对真空炉温度的控制,以达到提高真空炉温度控制品质的目的。并通过计算机仿真软件进行仿真试验,仿真结果表明单神经元PID控制系统可以对控制参数自整定,其对温度控制更加稳健,具有更强的抗干扰能力和鲁棒性。经过搭建真空炉温度控制系统试验平台验证后发现,应用单神经元PID控制的真空炉系统的温升过程表现出了良好的稳定性,但是温度控制的响应速度和保温的精度略有下降。要想进一步提高温控品质,需要就单神经元PID控制方法在响应速度和控制精度上做进一步改进。     

2.25Cr-1Mo与2.25Cr-1Mo-0.25V钢冷却转变对比分析

采用相变仪、光学显微镜及扫描电镜研究了2.25Cr-1Mo和2.25Cr-1Mo-0.25V钢冷却转变过程,并分析了钒对其冷却转变的影响。结果表明,与2.25Cr-1Mo钢的CCT曲线相比,2.25Cr-1Mo-0.25V钢铁素体转变区及贝氏体转变区均向右移,并且在现有试验条件下已无法观察到珠光体转变区;钒添加到2.25Cr-1Mo钢中,能够提高钢的淬透性,2.25Cr-1Mo-0.25V钢在48 000 ℃/h冷速下能生成部分马氏体;钒能够细化钢板显微组织,与2.25Cr-1Mo钢相比,2.25Cr-1Mo-0.25V钢在800 ℃/h冷速下组织更为细小。     

自动扶梯智能安防系统的设计

为了预防自动扶梯发生安全事故,设计了一种基于人工智能的自动扶梯智能安防系统。这一系统利用视频数据采集平台采集乘客数据,应用机器视觉及人工智能技术对乘客的姿态与行为进行主动识别,针对乘客的危险行为给出异常报警,在出现危险状态时触发声光报警器,控制自动扶梯减速或停止运行。这一系统通过有线或无线网络将数据传输至云平台,监管部门可基于手机客户端进行实时监控。特种设备监督管理部门、检验机构、维护保养单位、产权单位等可通过这一系统掌握自动扶梯运行状况。应用所设计的自动扶梯智能安防系统,可以显著提高自动扶梯安全事故预防水平和应急处理能力。